Entrance & ANPR
5 MP cameras support Hong Kong, Macau and Mainland plates, with release rules for monthly, visitor, staff and emergency vehicles.
Smart Parking & Electronic Payment Integration
GNS Technology Limited(友成科技有限公司) integrates ANPR, barriers, Octopus/card/QR payment, CCTV, APS and networking, with Siemens S7 PLC and IoT diagnostics. GNS owns design, installation, integration, testing and local support.
System Modules
Built on plate recognition, barriers and payment terminals, with hardware selectable from AKE and other brands. GNS integrates payment, CCTV, platform, networking and after-sales support around the site workflow, and can upgrade existing equipment in phases.
5 MP cameras support Hong Kong, Macau and Mainland plates, with release rules for monthly, visitor, staff and emergency vehicles.
0.6-second opening with six-axis sensing, anti-crush, anti-tailgating, fire linkage and power-failure lift.
Choose sensing for the ceiling, lighting and bay layout, with bay lights, vacancy displays and find-your-car.
Integrate Octopus, cards and QR codes for entry, monthly, visitor, discounts, reconciliation and CRM/ERP data.
Keep entry/exit snapshots, plate records and CCTV footage; APS handles incidents, exceptions and multi-entry status.
ZYCOO two-way intercom, zone broadcast, help points and evacuation notices for entrances, payment areas and lanes.
Plan VLANs, fixed IPs, PoE, backups, remote maintenance and APIs so subsystems do not become data silos.
Plate and video retention, access control, audit logging, patching, failure testing and complete handover documentation.
Site Installation
Photos are for lane installation reference only. Hardware is selected separately to suit the lane, traffic flow and payment requirements; equipment shown in the photos does not represent the models below.
Optional Hardware
The AKE hardware below is an optional example; actual models, specifications and supply are subject to project confirmation and do not represent the equipment in the photos above. Octopus, credit card and QR payment integration is delivered by GNS according to the merchant, payment platform and site equipment.
At one entry, monthly users, visitors, deliveries and emergency vehicles may need completely different treatment. Buying cameras and barriers first and forcing the platform to adapt often creates exceptions during payment disputes, duplicate entry, ANPR failure and fire-system integration. GNS maps access rules, payment, security events, control-room work and daily parking operations before finalising equipment and interfaces.
| Layer | Main equipment and functions | Design focus |
|---|---|---|
| Field devices | ANPR cameras, barriers, sensors, payment terminals, CCTV, intercom pillars, network speakers | Installation position, environmental protection, power and maintenance access |
| Edge control | Access controllers, audio server, recorder, switches and UPS | Basic operation during network and power loss |
| Management | Parking, payment, CCTV, IP Audio, reporting and APIs | Accounts, permissions, event correlation, reconciliation and audit |
| Operations | Control room, property management, security, engineering and finance | Alarm priority, workflows, SLAs and documentation |
Use VLANs or separate networks for parking operations, audio/video, management platforms and public access. ANPR, barriers and payment should normally be wired. CCTV and IP Audio require bandwidth, PoE and backup-power calculations. The control room should monitor device availability and receive disconnection alarms.
Plates and video can identify people. Collection scope, retention, access and deletion must follow the purpose. The system should support audit logs, export records, encrypted transport, role separation and temporary access for third-party maintenance. Government, public bodies and large property managers may also require incident, backup and recovery testing.
Complete the site audit and network clean-up first, then update access, emergency audio, payment or high-failure equipment by operational risk. Analogue audio can connect through an IP gateway so serviceable amplifiers and speakers remain in use instead of closing the car park for a full replacement.
GNS can act as the overall integrator for ANPR, barriers, sensing, payment, CCTV and ZYCOO IP Audio, or deliver only the network, installation, testing or audio subsystem. The proposal documents supply, installation, configuration, maintenance and interface responsibility so contractors do not pass faults to each other.
Delivery
Confirm entrances, lane width, camera angles, illumination, barrier positions, network, power and peak periods, and define what must be retained or updated.
Select plate recognition, barriers, payment methods and the APS platform to suit site conditions (for example AKE Xingyao/Haoyue series), and confirm supply, installation, integration and maintenance responsibilities in writing.
Complete VLANs, fixed IPs, PoE and power first, then install ANPR, controllers, barriers, payment kiosks and CCTV.
Test low light and heavy rain, unclear plates, network loss, power failure, manual release, payment reconciliation and event playback.
Hand over network diagrams, IP schedules, device serial numbers, account lists, operating procedures and test records, and help management teams get up to speed.
Provide local troubleshooting, spare parts, remote support, firmware and system change advice, with optional 24/7 managed support.
Latest consulting case
On a consulting assignment at a Hong Kong government office car park, GNS built a live record of Siemens S7 PLC memory and control signals. This moved investigation of intermittent no-response, repeated barrier movement and mid-operation stops from the operator screen into the CAS, I/O, PLC reset-pin timing, control-box network and field sensors.
The investigation also identified infrared sensor misalignment, vibration-induced false triggers on moving equipment and unstable long-range sensing. GNS proposed a revised PLC interface, industrial networking, exception handling, improved sensor mounts and calibration checks, followed by a pilot-bay validation and phased rollout.
Read the government office car-park PLC fault investigation | Explore PLC and IoT system diagnostics
Project representative confirmation
GNS helped us correlate the signal timing across CAS, PLC, I/O and sensors, making an intermittent fault that was difficult to reproduce much easier to verify. The intermittent issue that had affected us for six months was fully resolved within two weeks.
A Single Subsystem or a Complete Car Park System?
If the project only needs ANPR, automatic barriers and electronic payment, GNS can plan it directly; if it only needs entrance intercom, car park broadcasting and emergency notifications, see the ZYCOO IP Audio solution. If parking space sensing, payment, CCTV and central platform integration are required, GNS will first confirm the scope and brand mix, then quote as a total system.
FAQ
Typical scope includes entry/exit ANPR, barriers, intercom, bay sensors, guidance, payment, CCTV, control room, central platform, networking and IP Audio/emergency broadcast. The final scope depends on the site, operations and security requirements.
GNS can act as the overall integrator and select suitable vendors and systems, or deliver only ZYCOO IP Audio, networking, installation, testing or local support. The proposal documents the responsibility boundary for each subsystem.
Yes. The normal sequence is to stabilise the network and control room, then update access, emergency audio, payment, CCTV and bay sensing by operational risk. Existing analogue audio can remain through a gateway during the transition.
Performance depends on camera angle, illumination, trigger, vehicle speed, plate condition and platform settings. GNS tests the site and plans manual handling and offline operation; a laboratory accuracy figure is not treated as a guarantee.
Integration can use APIs, ONVIF, SIP, MQTT, databases or dry contacts, subject to the brands and versions in scope. GNS assesses the interfaces and places events, video, announcements and alarms into one operating workflow.
Define collection scope, retention, access and deletion for the actual purpose, supported by network segmentation, audit logs, encrypted transport and maintenance records. Backup and incident handling also need to be documented.
Offline and fallback modes must be designed in advance: manual barrier release, local controllers, UPS, control-room communications and delayed event upload. The exact capability depends on the chosen subsystems and must be tested before go-live.
Provide bay count, entry/exit points, site plan, existing systems, expected traffic, monthly/visitor mix, payment methods, control-room arrangements and security requirements. GNS will clarify the scope before proposing a phased solution.
GNS reconstructs the signal path from the operator platform through CAS, I/O, PLC, control-box networking and field sensors, then examines PLC memory, control-pin timing, connection records and live tests. The scope can include a short diagnostic, interface software, network clean-up, sensor calibration, monitoring and phased remediation.
For intermittent Siemens S7 PLC, CAS, I/O, control-network and IoT sensor faults, see PLC & IoT System Diagnostics. For parking IP Audio, intercom and emergency broadcast only, see the ZYCOO Hong Kong PA System solution. Pair the network and control room with Network Infrastructure Design & Implementation, then add 24/7 Managed Support after go-live.
Further reading: Hong Kong government office car-park PLC fault investigation and the Hong Kong Smart Parking System Integration Guide.
Last updated: 19 November 2026. Reviewed by the GNS engineering team.
Provide the number of spaces, entrances/exits, existing barriers and payment requirements; GNS will recommend a suitable hardware mix or phased upgrade and can arrange a site survey.